Rinowash Ego
Description
The device is a portable micronised nasal shower for aerosol therapy. It consists of a base unit containing a pneumatic micro compressor and a rechargeable battery. On the top is the medication cup with its nebulisation bell. It runs on a rechargeable battery and the charge status is shown by 3 LEDs. When switched on, the liquid in the cup is nebulised into the nasal cavities through an atomiser. Excess liquid and nasal secretions are collected in a gap between the two bells. The device is a micronised nasal shower for aerosol therapy that allows the treatment of upper respiratory tract conditions and the physiological (with saline, hypertonic solution or thermal water) and/or therapeutic (with medicines) washing of the nasal cavities. The device produces a jet of micronised solution which, directed into the nasal cavities, promotes the hydration, thinning and removal of mucus and catarrh.
Composition
Base unit: ABS, NBR rubber and silicone casing containing an electric micromotor and a lithium polymer battery (WEEE).
Upper part:
-medication cup: polycarbonate PC;
-atomiser: polycarbonate PC;
-outer bell: polycarbonate + silicone;
-O-ring seal: silicone.
Technical specifications
-Power supply: internal Lithium Polymer battery 3.7 V 1,650 mAh
-Power adaptor: input 100-240 V, 50/60 Hz, 0.5 A; output 5 V DC 2 A
-Minimum fill volume: 3 ml
-Maximum fill volume: 15 ml
-Max compressor pressure: 1 bar
-Max compressor flow: 5 lpm
-Weight: 260 g
-Dimensions: 210x60x100 mm
-Noise level: 58 dbA
-MMAD: 49 micron
-Service life of the device: 400 hours.
How to use
Warning: liquid entering the handpiece will damage the electrical components and endanger the user. Before carrying out the operations below, remove the accessories from the handpiece and make sure the power cable is not connected to the USB socket of the device.
Base unit:
-Cleaning: it must not be cleaned under water. Use a soft damp cloth; a neutral non-abrasive detergent may be used.
-Disinfection: use a sponge or soft cloth moistened with a cold disinfectant solution (e.g. a solution with a sodium hypochlorite concentration not exceeding 2%), following the manufacturer's instructions. Check that the solution is compatible with the material of the base unit.
-Sterilisation: no sterilisation cycle is provided.
Upper part components:
-Cleaning: they can be washed in hot water (approx. 40°C) with detergent (dosed according to the detergent manufacturer's instructions) and rinsed under running water. Once all parts are clean, dry them with a soft cloth and store them.
-Disinfection: after washing, they can be immersed in a cold disinfectant solution (e.g. a solution with a sodium hypochlorite concentration not exceeding 2%), following the manufacturer's instructions. The accessories can also be disinfected by boiling them in water for a maximum of 10 minutes: the components must not be in direct contact with the bottom of the pan.
-Sterilisation: they are compatible with autoclave sterilisation at 121°C for at least 15 min. (max 30 min.) for a maximum of 20 cycles.
Storage
-Temperature: -20°C to +60°C.
-Relative humidity: <85%.
-Atmospheric pressure: 700-1,060 hPa.
Pack size
Pack containing 1 Rinowash Ego.
Code 418000
