RINOWASH REPLACEMENT KIT
Description
Replacement parts kit for the Rinowash upper airway treatment device.
How to use
Cleaning: once disassembled into its components, Rinowash can be washed in hot water (about 40°C) using detergent (dosed according to the detergent manufacturer's instructions) and rinsed under running water. When all parts have been cleaned, they can be dried with a soft cloth and put away.
Disinfection: after washing, all components of the Rinowash nasal douche can be immersed in a cold disinfectant solution (for example a solution with a sodium hypochlorite concentration not exceeding 2%), following the solution manufacturer's instructions.
All components of the nasal douche can also be disinfected by boiling them in water for a maximum of 10 minutes: the components must not be in direct contact with the bottom of the pan.
Boiling may alter the colour or appearance of the components; this does not affect the operation of the device.
Sterilisation: all components of the Rinowash nasal douche are compatible with autoclave sterilisation at 121°C for at least 15 minutes (maximum 30 minutes) for up to 20 cycles.
Composition
Atomiser: polycarbonate.
Outer bell: polycarbonate and silicone.
Seal: silicone.
None of the materials used contain phthalates and no natural latex has been detected.
Warnings
This replacement kit can only be used with the Rinowash device.
Refer to the Rinowash device instructions for use.
Storage
Store the product at a temperature between -25°C and +50°C and at a humidity between 30% and 90%.
Pack size
The pack contains:
- 1 atomiser
- 1 outer bell
- 1 seal.
Code 471232